Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Repair for Durham Homeowners
When your garage door quits, your car is stuck inside, your home’s security is on hold, and the whole morning falls apart. We handle garage door repair across Durham with technicians who have up to 15 years of experience and know the specific systems installed in this city’s homes. Our team is certified on eight major brands, including Clopay, Amarr, Wayne Dalton, and Craftsman, so we’re not guessing at your door’s mechanism. We diagnose the actual failure, quote the fix in writing before any work starts, and get your door moving again. Most repairs are handled the same day. Call (844) 460-7528 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm.
Garage Door Spring Repair
Garage Door Spring Repair is the work of replacing the torsion or extension springs that carry the door’s weight, and it’s the most common reason a door won’t lift or comes down too hard. Springs fatigue after years of daily cycles, and in Durham’s humid summers and mild winters they can fail without much warning. We replace the failed spring, check the cables and drums while we’re in there, and balance the door so the opener isn’t fighting it. Typical spring repair runs $180 – $340 for one spring. A matched pair is usually replaced together, so a pair costs about twice that range. The written estimate sets the final price before we touch a tool.
How Springs Fail
A torsion spring usually breaks with a sharp bang and leaves the door too heavy to lift by hand. Extension springs stretch over the track and can snap loose, which is why they need safety cables. Either way, the door is done moving until the spring is replaced.
Why a Professional Should Do It
The springs hold the full weight of the door under high tension, and working on them without the right winding bars and training is genuinely dangerous. We’d rather you call than try it yourself. Our technicians reset the tension to your door’s weight and test the balance before we leave.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Garage Door Sensor Repair
Garage Door Sensor Repair fixes the safety eyes at the bottom of your tracks when they stop talking to the opener, and it’s the reason a lot of doors close partway and reverse for no obvious reason. A crooked bracket, a sunbeam hitting the lens, or a wire chewed during yard work can all break the beam. We test both sensors, realign them, check the wiring back to the motor head, and confirm the door reverses correctly on contact. Sensor and safety-reverse repairs usually fall inside our opener repair range of $120 – $320, depending on whether it’s a bracket, a wiring run, or the sensor unit itself. You’ll get the written estimate before work begins, and no hidden add-ons after.
Common Sensor Symptoms
If the door closes a foot and pops back up, flashes its light, or the wall button does nothing, the sensors are the first thing to check. A sensor knocked out of line by a trash can or a kid’s bike is the most common culprit. We reset the alignment and confirm the opener reads both eyes cleanly.
When the Sensor Isn’t the Problem
Sometimes the sensors are fine and the fault is in the logic board or the travel limits. Our diagnosis covers the whole opener, not just the eyes. That means we can tell you honestly whether you’re looking at a simple fix or a unit that’s had its day.
Emergency Garage Door Repair
Emergency Garage Door Repair is for the door that’s stuck open at night, off its track, or jammed with the car inside, and it’s the call we take most seriously. A hanging door is a security gap and a real hazard if someone leans on it. We secure the door first, assess what failed, and get it working or safely closed until we can complete the fix. Most emergency jobs fall within our general repair range of $150 – $600, and you’ll know the price from the written estimate before we start. Call (844) 460-7528. We answer 24/7. Fast dispatch from 7am to 7pm runs Sunday through Friday, and a call outside that window is booked into the next opening.
What Counts as an Emergency
A door stuck open, a snapped cable whipping loose, or a door that’s come off one side of the track all qualify. So does an opener that’s jammed and won’t release the door manually. Any of these leaves your home exposed or the door unsafe to move.
Keeping the Door Safe Until We Arrive
Don’t force a door that’s off track or hung up on a broken spring, and keep the area clear underneath it. If the door is open, close it by hand only if it moves freely and stays put. Otherwise leave it and let us handle it.
Garage Door Panel Replacement
Garage Door Panel Replacement is swapping a single damaged section rather than the whole door, and it saves real money when the damage is localized. A backed-into dent, a cracked section from a storm, or a panel that’s rusted through is a good candidate. We match the section profile and color where we can, source it for your specific make, and align the new panel so the door runs smooth. Panel replacement typically runs $250 – $500 depending on the panel and the door style. For a Clopay or Amarr sectional, we identify the model before ordering so the new section actually fits. The written estimate sets the final price.
Repair Versus Replace the Door
One dented panel on an otherwise sound door is almost always worth replacing the section. If the door is bent in multiple spots or the frame is failing, a full replacement can be the better call. We’ll tell you which one makes sense instead of nudging you toward the bigger job.
Matching Color and Style
Older doors can be hard to color-match, so we check the model and finish before ordering. If an exact match isn’t available, we’ll show you the closest options up front. You decide before we place the order.
Garage Door Maintenance
Garage Door Maintenance is the tune-up that keeps a working door working, and it’s worth doing before a small issue turns into a breakdown. We lubricate the springs, hinges, and rollers, check the balance and the travel limits, tighten the hardware, and test the safety reverse. In Durham, the seasonal swings between humid summers and cooler winters make the hardware work, so a yearly check catches wear early. A maintenance call is not a sales pitch for parts you don’t need; it’s a way to avoid finding a broken spring on a morning you’re already late. Maintenance pricing is set per job by the written estimate, and we’ll flag anything that’s wearing before it fails.
What a Tune-Up Covers
We lubricate the moving parts, check the spring tension and cables, test the opener’s force and travel settings, and confirm the safety reverse works. We also look at the rollers and hinges for wear. Anything that needs attention gets quoted in writing first.
How Often to Schedule
Once a year is a sensible rhythm for a door that runs every day, and it’s the cheapest way to catch problems early. If your door gets heavy use from a busy household or a rental property, more frequent checks help. We’ll tell you what your specific door needs.
Garage Door Roller Replacement
Garage Door Roller Replacement is the fix for a door that rattles, screeches, or jerks as it travels up and down, and it’s often the cheapest repair on the list. Rollers wear flat, dry out, or seize over time, and a seized roller drags the door and strains the opener. We replace the worn rollers, check the hinges and tracks while we’re there, and set the door so it glides quietly. Roller replacement typically runs $110 – $220 depending on how many rollers and what condition the tracks are in. The written estimate sets the final price, and we won’t replace the whole set if only a few are shot.
The Sounds That Mean Worn Rollers
A grinding or squealing noise that gets louder as the door moves points to dry or seized rollers. A door that shudders on its way up is another sign. Left alone, a bad roller wears the track and puts more load on the opener.
Nylon Versus Steel
Nylon rollers run quieter and are gentler on the track; steel rollers last longer under heavy use. We’ll match the roller to your door and how much it cycles each day. You’ll know the difference in performance before we choose.
Commercial Garage Door Repair
Commercial Garage Door Repair covers the roll-up, sectional, and overhead doors on shops, small warehouses, and rental properties, where a door that won’t open stops business. These doors cycle far more than a home door, so springs, cables, and operators wear out faster and failures show up as a door that stalls partway or won’t close all the way. We work on the door and the operator together, since a commercial door problem is often a worn spring straining the motor. Most commercial repairs fall within our general repair range of $150 – $600, with the written estimate setting the final price before work starts. Small landlords and property managers get one point of contact for multiple doors.
Heavy-Cycle Wear
A door that runs dozens of times a day wears its springs and cables much faster than a home door. We look at the full door, not just the part that broke, so we’re not back next month for the next failure. The goal is a door that stays in service.
Keeping Tenants and Staff Moving
For a rental or a shop, an out-of-service door means unhappy people and lost time. We diagnose quickly and tell you plainly whether a repair will hold or whether the door is at the end of its life. You get the straight answer either way.
Garage Door Cable Repair
Garage Door Cable Repair is the work of replacing a frayed or snapped lift cable on one side of the door, and it’s a job that should never wait. A broken cable leaves the door hanging at an angle and can let it drop, so the door shouldn’t be used until it’s fixed. We replace the cable, check the drums and the spring on that side, and level the door so it lifts evenly. Cable repair typically runs $130 – $250, and the written estimate sets the final price before we start. Cables work under the same high tension as the springs, which is exactly why this isn’t a homeowner job.
Spotting a Failing Cable
Look for fraying or a kinked strand along the cable, or a door that hangs crooked with one side higher than the other. A loud snap followed by a door that won’t lift is a cable that’s already failed. These are signs to stop using the door and call.
The Danger of a Broken Cable
Cables hold tension that can cause serious injury if one lets go while you’re near it, so keep clear of a door with a snapped cable. Don’t try to lift or balance the door yourself. This is work for a trained technician with the right tools.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We’re certified to work on eight major brands, and we service each one enough to know where it wears out. On Clopay and Amarr doors we know the section profiles and how their hardware ages. Wayne Dalton systems have their own quirks in the track and hinge layout, and Craftsman openers are common in older Durham homes, where the logic board and travel limits are the usual suspects. Knowing the make means faster diagnosis and fewer callbacks.
We also work on LiftMaster, Chamberlain, Genie, and Raynor equipment, covering both smart Wi-Fi openers and older mechanical units, so an aging system doesn’t get turned away. Our brand-agnostic approach means we work on what you already have rather than pushing a replacement you don’t need. And because we also handle installation, we can tell you honestly when a repair is worth it and when a new door or opener is the smarter investment. Whether you have Clopay or any other make, we can help.
Signs You Need a Pro Right Now
- The door won’t lift or feels far too heavy. A door you can barely raise by hand usually means a broken spring, and forcing the opener will burn out the motor. Stop using it and call.
- You heard a loud bang from the garage. That’s often a torsion spring snapping, and the door won’t work until it’s replaced. Don’t try to open it manually.
- The door is crooked or hanging on one side. A snapped cable or a jumped track leaves the door unbalanced and unsafe to move. Keep people clear of it.
- The door reverses on its own or won’t close. A sensor or safety-reverse fault is a safety issue, not just an annoyance. Get it checked before someone gets hurt.
- The door is grinding, screeching, or shuddering. Worn rollers or dry tracks add strain to every part. Small noises are cheap to fix; ignored ones get expensive.
Our Process, Step by Step
- 1
You call and describe the problem. We take down the door and opener details so the technician arrives knowing what to expect. That first conversation is free. Call (844) 460-7528, and we answer 24/7.
- 2
We diagnose the actual failure. We test the door’s balance, check the springs, cables, rollers, and sensors, and test the opener’s force and travel settings. We work on your brand, so we’re not guessing at how your system is built.
- 3
You get a written estimate before any work. We explain what failed, what it takes to fix it, and what it costs. The price is quoted and agreed before we start, so there’s no surprise on the invoice.
- 4
We complete the repair and test it. Springs get wound to the door’s weight, cables get tensioned evenly, and the door gets run up and down to confirm it’s smooth and safe. We check the safety reverse before we call it done.
- 5
We tell you what’s next. If something else is wearing, you hear about it now rather than as an emergency later. No pressure, just a straight answer on what your door needs.
How Much Does Garage Door Repair Cost in Durham?
Garage door repair in Durham typically runs $150 – $600, depending on what failed and how many parts are involved. A common spring replacement is $180 – $340 for one spring, and a matched pair is usually replaced together at about twice that. Cable repair runs $130 – $250, roller replacement $110 – $220, and track realignment $120 – $240. If the opener is the problem, opener repair is $120 – $320. A single damaged panel is $250 – $500 to replace, and a full new door, when that’s the smarter call, is $700 – $2200 installed.
What moves the price is the part that failed, the door’s size and weight, and whether one thing or several need attention at once. A door that’s off track and also has a worn spring costs more than a simple roller swap. Older systems can take longer to source parts for, which counts too. You avoid overpaying by getting the written estimate first and asking what’s included, which is exactly how we work.
Our free estimate covers the diagnosis, the parts, and the labor in one number before any work starts. The written estimate sets the final price, not a guess over the phone and not a bill that grows once the door is apart. Call (844) 460-7528 for an exact quote; estimates are free.
Our Service Area Near Durham
We serve Durham and the surrounding towns, including Carrboro, Hillsborough, Briar Chapel, Mebane, Pittsboro, Rougemont, and the Governors Club and Governors Village communities. If you’re just outside these areas, call and we’ll tell you whether we cover your address. For nearby homeowners we also handle garage door repair in Carrboro, and over toward Orange County we cover garage door repair in Hillsborough, so a door problem doesn’t have to wait on a long drive. Call (844) 460-7528 and we’ll book you into the next opening.
Serving Durham, NC – Our Local Coverage Area
We serve Durham and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Garage Door Repair in Durham
Garage door repair is fixing the parts that make a door open, close, and stay safe, including springs, cables, rollers, panels, tracks, and sensors. It covers anything from a snapped spring to a door that reverses on its own, so the door works the way it should. We diagnose the specific failure and fix that part rather than replacing the whole door. Call (844) 460-7528 for a free estimate.
Most repairs take between an hour and a couple of hours, depending on the part and how many issues turn up. A roller swap or sensor fix is usually quick, while a spring or cable job takes longer because the door has to be balanced afterward. We’ll give you a realistic time when we quote the work. Call (844) 460-7528 to book a time.
Garage door repair in Durham typically runs $150 – $600, with the exact price set by the written estimate before work starts. Spring repair is $180 – $340 for one spring, cable repair $130 – $250, roller replacement $110 – $220, and opener repair $120 – $320. The part that failed and the door’s size drive the number. Call (844) 460-7528 for an exact quote; estimates are free.
Yes, we’re certified on eight major brands, including Clopay, Amarr, Wayne Dalton, and Craftsman, along with LiftMaster, Chamberlain, Genie, and Raynor. That means we know where each make tends to wear and can diagnose your system without guesswork. Whether you have Clopay or any other make, we can help. Call (844) 460-7528 to schedule.
Yes, most repairs are handled the same day when you call during dispatch hours. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. A call outside dispatch hours is booked into the next opening. Call (844) 460-7528 and we’ll set it up.
We stand behind the work, and the written estimate spells out the terms for the parts and labor on your job. Ask about the specific coverage when we quote the repair so you know what’s included. You’ll get it in writing before any work begins. Call (844) 460-7528 with questions.
Clear the area under and around the door, move cars and bikes out of the way, and note anything unusual about how the door has been behaving. Have the make and model of your door or opener handy if you know it, but it’s not required. Then let the technician work; we’ll explain what we find. Call (844) 460-7528 to book the visit.
Schedule Your Garage Door Repair Service in Durham Today
A stuck or broken door won’t fix itself, and the sooner it’s handled, the less it costs. Call Durham Garage Door Service at (844) 460-7528 for a free, no-obligation estimate, with the price quoted and agreed before any work starts. We answer 24/7, with fast dispatch from 7am to 7pm. Get your door moving again with Durham Garage Door Service.
Written by the team at Durham Garage Door Service.